Instruction Manual - GRAPHITE 59G522 Manual Del Usuario

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
SPECIFIC REGULATIONS REGARDING SAFE USE OF HOT AIR GUN
This equipment is not designed for use by persons (including children) with limited physical, sensory or
mental abilities, persons with insufficient experience or knowledge about device, unless under supervision
or acting in accordance with instructions regarding use of equipment provided by persons responsible for
their safety. Pay attention to children, do not allow to play with the equipment.
Careless handling of the hot air gun may cause fire, therefore:
– be careful when using the hot air gun in places, where flammable materials are present;
– do not direct stream of hot air onto the same place for a long time;
– do not use hot air gun in explosive atmosphere;
– bear in mind that heat can transfer to flammable materials that are beyond field of view;
– leave the hot air gun to cool down after use and before storing;
– do not leave the hot air gun unattended.
ADDITIONAL SAFETY RULES
Use protective goggles when operating the hot air gun.
Do not obstruct air intake holes or outlet nozzle hole of the hot air gun.
Do not touch nozzle of the hot air gun during operation or just after.
Keep the hot air gun handle clean, do not allow traces of oil or grease.
When working outdoors do not use hot air gun when it is raining or in high humidity.
Do not put the hot air gun away when it is switched on.
Do not direct flow of hot air from the gun at one point for a long time.
Always switch off the hot air gun with its switch before removing the power cord plug from mains
socket.
Remove particles of paint deposited on the nozzle of hot air gun from time to time to prevent
spontaneous ignition.
Prior to commencing any tasks with hot air gun, always ensure that the surface to be heated is not
flammable.
Removing oil paint that contains lead can be carried out in rooms with good ventilation only. Vapours
of such paints are poisonous. Use mask for protection of respiratory system.
When using hot air gun do not use agents such as turpentine, solvents or petrol.
Do not touch hot parts of the gun just after its operation has been finished. Burns resulting from
negligence of these rules constitute main hazard when working with hot air gun.
Never point operating hot air gun at any person or animal (e.g. to dry hair). Hot air gun produces much
higher temperature than hair dryer does.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of operational injuries.
CONSTRUCTION AND USE
Hot air gun is a hand-held power tool with insulation class II. Double insulation of the hot air gun and
integrated protection against overheating (thermal switch) ensure safe operation. It is equipped with AC
motor that drives small turbine inside, which forces air to flow through heating element. Stream of air is
then directed through outlet nozzle towards processed surface. Design of the hot air gun allows to use one
HOT AIR GUN
59G522
DETAILED SAFETY REGULATIONS
12