Monster CLARITY HD Manual De Instrucciones página 4

Power/Charging
Before using the headset wirelessly, you need to charge
the battery and pair the headset with a compatible device.
The package includes a Micro USB cable that can be
connected to your computer or other device made for
USB charging. You can use a standard USB compatible
charging device that plugs directly into a wall socket, or
you can plug the USB cable directly into a laptop or PC.
Plug the Micro USB end of the included USB cable into the
USB micro port charger connector under the right earcup
of the headphone. Plug the other end into a USB port on
your computer or other devices made for USB charging.
The indicator light will be red while charging. Once fully
charged, the LED will be off. Charge time is 2 hours on an
empty battery. The fully charged battery has power for
up to 20 hours talking and/or music time. In this mode
you can listen to your headphones via Bluetooth wireless
communication or through the 3.5mm audio in.
Pairing
1. Ensure that your phone or music player is switched on.
2. To pair the headset if it has not been previously paired
with a device, switch on the headset, it will enter the
pairing mode automatically and the blue and red
indicator light starts to flash quickly. The headset is
ready to pair with your device.
3. To pair the headset if it has been previously paired with
another device, ensure that the headset is switched off,
and press and hold the multifunction key (for about five
seconds) until the blue and red indicator light starts to
flash quickly.
4. Activate the Bluetooth feature on your phone or music
player, and set it to search for Bluetooth devices.
5. Select "ClarityHD On Ear" from the list of found
devices on your phone or music player.
6. If necessary, enter passcode 0000 to pair and connect
the headset to your device.
Using ClarityHD On-Ear Without
Battery Power
If your Cla r ityHD On-Ear headphone is not charged,
Bluetooth wireless communication will not be available.
No Batteries Required
You can use your Cla r ityHD On-Ear headphone as a wired
headphone to save batteries or if your batteries are not
charged. Simply connect one end of the cable to the
bottom of the earcup and the other to your wireless
capable or wired MP3 player. By inserting an audio cable
in this way, Cla r ityHD On-Ear wireless functionality is
automatically disabled.
Disconnect the Headphone
To disconnect the headset from your device, switch off
the headset, or disconnect it in the Bluetooth menu of
your device.
Reconnect the Headphone
To connect the headset to the phone or music player that
you last used with it, switch on the headset or make the
connection in the Bluetooth menu of your device.
Headset Controls
FUNCTION
ACTION ON TOUCH PAD
Hold for 2 sec. voice dial when no call is in progress
tap x1
answer call/end call
Hold for 2 sec. reject call
*tap x1
accept call waiting
*tap x2
accept call on hold
*Hold for 2 sec. reject call waiting
*Hold for 2 sec. switch call between phone and
headset
Hold Touch Pad and redial
Multifunction button
for 2 sec.
*Double press mute/unmute microphone
Multifunction Button
*Action during call.
Listen to Music
To listen to music, connect the headset to a compatible
music player that supports A2DP Bluetooth profile. The
available music functions depend on your music player.
To play a song, select the song in the music player and
press the play/pause key on the Cla r ityHD On-Ear Headset.
To pause or resume playing a song, press the play/pause
key.
If you receive or make a call while listening to music, the
music is paused until the call ends.
INDICATOR LIGHT DESCRIPTION
Red flash x2 Connectable
Blue and red
Connectable/Discoverable
alternate flash
Blue flash x1
• Connected
• Outgoing Call Establish
• Incoming Call Establish
• Active Call
• TWC Call Waiting
• Active Call no SCO
• Streaming A2DP
Red flash x1 • TWC Call On Hold
• TWC Multi Party Call
GUIDE TO INDICATOR LIGHTS
Headphones "Break-in"
Break-in time for headphones? We're kidding, right? No
we're not. Like any high performance product, whether it's
cars or headphones, they're mechanical devices that settle
in after use. Your new headphones will sound incredible
out of the box, but will "mellow" out after use and sound
even better. We recommend playing them for 8 hours.
After 20 hours of playing, they should be fully broken in.
Enjoy.