Brentwood Appliances KT-1960BK Instrucciones De Operación Y Seguridad página 4

2. Bring it to a boil.
3. Empty the water from the Kettle. Once cooled rinse Kettle with water.
4. Repeat process at least 2 times to ensure your Kettle is clean.
Attention: First use may cause a slight odor or small smoking upon heating, it is normal. This
is a result of the heating element chemical reaction. It quickly goes away.
Parts:
Stainless Steel
Infuser
Borosilicate
Glass Body
LED Power
Indicator
Light
Using Your Kettle:
1. Pull out the power cord from the base unit and connect it to a power outlet.
2. Open the lid then fill the water into the Kettle.
CAUTION: Do not overfill the product or operate it when empty.
3. Close the lid. Place the Kettle back onto the base unit. Making sure there is not water on
the bottom of the Kettle.
4. Turn the Kettle on by pushing the switch from "O" (off) to "I" (on). The Blue LED light
inside the Kettle should illuminate to indicate the Kettle is heating.
5. The Kettle will automatically switch off to the "O" position once the water has boiled. The
Blue LED light inside the Kettle will turn off.
Note: The switch only works when the Kettle body is correctly placed on base unit.
6. After water has boiled, place tea in infuser and allow tea to brew to the desired amount of
time.
Spout
Lid
Lid Release Button
4
Power
Switch
Handle
Water Level
Indicator
*some kettles have
graduated markings
inside Glass Body.
Power Base