Dr.Mach LED 150 Manual De Instrucciones página 5

EN User manual - English
Congratulations on acquiring a new MACH LED 150 examination
light.
Please read these Instructions for use very carefully.
Instructions for safe use
1.1 Intended user
The Mach LED 150 is a Class I medical product and may only be
operated by trained medical staff.
1.2 Information and obligation of the user to check the product
Pay attention to the instructions for use when handling the lamp.
These Instructions for use are part of the product and must therefore
be stored in a place close to the product in order for the safety in-
structions and important information to be consulted at any time.
Make sure that the lamp is in satisfactory working order before every
use. If there is obvious damage, unusual operating conditions, etc.,
the lamp must not be used.
1.3 Availability of the instructions for use
These instructions for use and a detailed manual with further tips on
how to use the light can be found online at the following link:
https://dr-mach.de/login/mach-led-150.html
1.4 Intended use / contra-indications
The Mach LED 150 examination light is designed to illuminate an ex-
amination site in medical facilities (e.g. in a laboratory, in hospitals or
doctor's practice) with focused, low-glare, shadow-free light. It ena-
bles the user to perform a diagnosis or carry out medical interven-
tions. The Mach LED 150 light is an operating light that is not fail-safe
when used as a single light. This device is not designed to operate in
areas which are subject to explosions.
Continuous illumination of the open human eye should be avoided
when illuminating the face area.
59321001
1.5 Technical data
Class of protection I
IP protection class IP 42
Input voltage 100-240 V AC, 50/60 Hz
(power supply)
Input voltage 24 V DC
(light body)
Power consumption 35 W
Current 1.45 A
Examination time Continuous operation possible
1
Expected life 10 years
1
At the end of the expected (designed) service life, the lamp must be ser-
viced more frequently for safe operation (see the manual for details).
1.6 Lighting technical data
Mach LED Mach LED
150F 150
Central illumi- 110,000 lux 110,000 lux
nance (dis-
tance 1 m)
Light field dia- 180 mm 200 mm
meter d10
Light field dia- 96 mm 113 mm
meter d50
Residual light 0% 0%
intensity (one
shadower)
Residual light 55% 50%
intensity (two
shadowers)
Residual light 100% 100%
intensity
(normed tube)
Residual light 0% 0%
density
(normed tube,
one shadower)
Residual light 55% 50%
density
(normed tube,
two shadow-
ers)
Depth of illumi- 1800 mm 1750 mm
nation (20%)
Depth of illumi- 900 mm 800 mm
nation (60%)
5 / 70
Radiation in- 379 W/m
tensity in the
field
(distance 1 m)
Radiation in- 454 W/m
tensity in the
field
(distance 0.85
m)
For a complete overview of technical and lighting specifications, refer
to the manual.
1.7 Installation/Maintenance/Repair
The lamp may only be installed, maintained or repaired by the man-
ufacturer or by specially trained staff. Maintenance must be carried
out at least every two years
Mach LED
150 Plus
1.8 Environmental conditions for operation
130,000 lux
Ambient temperature:
Relative air humidity
172 mm
Air pressure
90 mm
1.9 Reporting obligations
All serious incidents which have occurred in connection with the prod-
0%
uct must be reported to the manufacturer and the competent author-
ity.
54%
Images on the device
100%
This symbol tells the user to observe the
instructions for use.
0%
Serial number of the product
54%
Part number of the product
1800 mm
Address of the manufacturer
840 mm
Date of manufacture and country of manu-
facture
Mach LED 150
2 376 W/m 2 459 W/m 2
2 2 2
460 W/m 541 W/m
+5°C to +40°C
30% to 75% RH
700 hPa to 1060 hPa
V1 2021-05-07