Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION
1.
TESTING FLOAT
Manually fill the tank with water. The pump motor will turn on and the
fan will be audible. Ensure that the fan blades are moving by looking
through the top of the pump. Ensure that water is pumping out of the
outlet tube.
1
MAINTENANCE AND DISASSEMBLY
ALWAYS disconnect power before performing maintenance. Pump and
deck may be removed from tank by pushing tabs located on tank sides
away from deck while lifting on pump cover.
Periodically inspect the condensate
pump tank to ensure it is free of
accumulated dirt or sludge. DO
NOT use solvent cleaners. Clean
tank with soap and warm water
only. Check valve may be removed
for cleaning or replacement by
unscrewing with a 5/8" wrench.
Clean inlet and outlet piping.
Reassemble system and check for
correct operation.
w w w. d i v e r s i t e c h . c o m
1
|
8 0 0 . 9 9 5 . 2 2 2 2
1
2
A
PA G E
9
Tabla de contenido
