Technical Data; Before Starting Up - Forch 5352 5 9033 8 Manual De Instrucciones

■
Only use dry, clean compressed air. Never use oxygen, carbon dioxide or other bottled
gases to power pneumatic tools.
■ Only use spare parts, fittings and accessories recommended by the manufacturer.
■
Never carry the device at the compressed air hose.
■
Never carry the tool connected to compressed air with your finger on the actuating lever.
■ Avoid unintentional operation.
■
Keep handles always dry, clean, oil- and grease-free.
■
Make sure to have a clean, well-ventilated and always well lit working area.
■ Never use the tool under the influence of drugs or alcohol.
■
Repairs must be executed by authorised personnel only.
■
Marking of the device has to be always easily legible. It's the operator's responsibility to
keep the label with warning instructions, turns, serial and article number undamaged and
in well legible state.
■
Never use quick-coupling systems directly at the device. There has to be at least
a 20 cm hose separating the quick-coupling system from the unit.
■
Always change cutting disks only when the compressed air hose is disconnected.
■
Pay attention to the safety instructions.
■ Only use the cutting / grinding disks specific for this special tool.

10. Technical data

Air connection thread:
Grinding /cutting disk mm
Max. idling speed U/min
Weight kg
Recommended hose diameter mm
Air consumption l/min
Operational pressure bar
Sound power level dB(A)
Sound pressure level dB(A)
Vibration acceleration m/s2
Dimensions of the device mm
Shaft thread
11. Delivery
Additional Reach Cutter
Allen® Key
Flat Key

12. Before starting up

IMPORTANT:
The use of air filters and a compressed air hose lubricator is recommended.
ATTENTION!
Before lubricating, connecting or disconnecting of the tool disconnect the compressed air.
■ Lubricating the tool, see maintenance in this operation manual.
■
Remove the dust cap at the compressed air inlet.
■
Connect the unit to a hose of suitable size.
1⁄4˝
100 x 0,8 x 9.53
16.000
1.8
10
113
6.3
96.8
102.3
0.14
400 x 115 x 66
M 6 Inside