Noise/Vibration Information - Würth 5701 410 00 Serie Manual De Instrucciones

Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories or
storing power tools. Such preventive
safety measure reduce the risk of starting
the power tool accidentally.
For safe and proper working, always
keep the product and ventilation slots
clean.
If the product should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by a Würth master-Service.
In all correspondence and spare parts orders, please
always include the article number given on the type
plate of the machine.
The current spare parts list for this power tool can be
viewed in the Internet under "http://www.wuerth.
com/partsmanager" or be requested from your next
Guarantee
For this Würth power tool, we provide a guarantee in
delivery document). Damage that has occurred will be
corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the power tool is sent
sales representative or a customer service agent for
Würth compressed-air and power tools.
Disposal
The product, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of power tools into household waste!
According to the European Guideline
2012/19/EU for Waste Electrical and
Electronic Equipment and its implementation
into national right, power tools that are no
longer usable must be collected separately
and disposed of in an environmentally
correct manner.

Noise/Vibration Information

Measured sound values determined according to EN
62841.
Typically the A-weighted noise levels of the product
are: Sound pressure level 56.0 dB(A); Sound power
level 67.0 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Overall vibrational values (vector sum of three
directions) determined according to EN 62841:
Vibration emission value ah,D = 1.5 m/s
K=1,5 m/s .
2
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 62841 and may be
used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However, if the
accessories or is poorly maintained, the vibration
exposure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
exposure level over the total working period.
Identify additional safety measures to protect the
the tool and the accessories, keep the hands warm,
organise work patterns.
, uncertainty
2
22