Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Ambient operating temperature
for the tool and battery pack
Ambient storage temperature
for the tool and battery pack
Recommended ambient
charging temperature
Recommended battery type
Recommended charger
Know Your Product
See page 3.
1. Nozzle
2. Long Cartridge Holder (600ml)
3. Plunger Rod (600ml)
4. Trigger
5. Trigger lock
6. Speed dial
7. Battery pack
Intended Use
The caulking gun is intended for the following
applications:
Sealing cracks to keep your home's conditioned
air inside while keeping unconditioned air outside,
Filling holes and cracks before painting.
Creating a moisture barrier around areas which
could be damaged by water.
Sealing cracks to keep insects from crawling inside
your home.
Applying adhesive.
Do not use the product for any other purposes.
0 - 40°C
0 - 27°C
5 - 40°C
LI 18V/2 Ah
BASIC
LI 18V/4 Ah
BASIC
LI 18V/5 Ah
BASIC
ALG 18/4 BASIC
ALG 18/6 FAST
A battery that is new or has not been used for a longer
period does not develop its full capacity until after
approx. 2 – 3 charging/discharging cycles.
Do not place down the battery on radiators or expose
it to intense sunlight for longer periods; temperatures
above 50 °C cause damage.
Keep the contacts/terminals of the charger and
replaceable battery clean. For optimal service life,
fully charge the battery after use.
Overload protection
When overloading the battery through very high
power consumption, e.g. from extreme high torque
applications, jamming of the drill bit, sudden stopping
or short-circuiting, the power tool will hum for 2
then press it again.
The battery can heat up considerably under extreme
Charge the battery in the charger to recharge and to
reactivate it.
Symbols
Read all safety warnings and all
instructions.
Warning
CE conformity
EurAsian Conformity Mark
Waste electrical products should
not be disposed of with household
waste. Please recycle where facilities
exist. Check with your local authority
or retailer for recycling advice.
Battery
21
Tabla de contenido
