hafele R2 Dialock Instrucciones De Montaje Y De Servicio página 27

• Place the reader unit in the frame and push to snap in.
• To dismantle, push a screwdriver into the slot and lever the unit out as
shown.
Mounting the control unit
The control unit may be damaged by use of unsuitable tools.
- The distance between the control and reader unit may be up to 50
metres.
- Mount the control unit on a standard rail (top-hat rail) in accordance
with DIN EN 50022.
- Connect the wires as stated in table 2 page 25.
- If necessary, connect the recovery diode on the equipment being
switched (door opener).
Mounting and Operating Instructions
Wall terminal R2 Dialock - status: 12.2016 - 732.29.132
27