Troubleshooting - Haier 40D2500 Manual Del Usuario

TROUBLESHOOTING

Please make these simple checks before calling service. These tips may save you time and money since charges for
receiver installation and adjustments of customer controls are not covered under your warranty.
S y m p o t m s
"Ghost" or double image
No power
No picture
Good picture but no sound
Good sound but poor color
Poor picture
Snowy picture and noise
Horizontal dotted line
Television not responding to
remote control
Pixels (dots) that are always
dark or always lit
I e t m s o t C
This may be caused by obstruction to the antenna due to high rise
buildings or hills. Using a highly directional antenna may improve the
picture.
Check if the TV's AC power cord is plugged into the outlet.
Unplug the TV, wait for 60 seconds. Then reinsert plug into the outlet
and turn on the TV again.
Check antenna connections at the rear of the TV to see if it is properly
connected to the TV.
Possible broadcast station trouble. Try another channel.
Adjust the contrast and brightness settings.
Check the Closed Captions control. Some TEXT modes could block the
screen.
Increase the volume level by pressing the VOL+ button on the remote
control or on the TV side control panel.
Press the MUTE
Adjust the contrast, color and brightness settings.
Poor picture quality may occur when an activated S-VHS camera or
camcorder is connected to your TV and other peripherals at the
Check the antenna connection.
This may be caused by electrical interference (e.g. hair dryer, nearby
Check whether the batteries are working. Replace if necessary.
Clean the remote control sensor lens on the TV.
You can still use the buttons on the side of your TV.
Your TV is precision-manufactured using an extremely high level of
technology. However, sometimes pixels may not display correctly.
These types of occurrences are inherent to this type of product and do
not constitute a defective product.
19
h e k c a n d A t c o i s n o t F l o o l w