STEP 2
NOTE: ASSEMBLY SHOWN FOR 85 - 96 in. DISTANCE.
2-1. Slide two tube collars (H) down a long tapered tube (D) and use set screws to loosely
tighten into place, you will be adjusting later. Repeat process for the medium tapered
tube (C).
2-2. Place the tapered end of the long tapered tube (D) into the untapered end of the
medium tapered tube (C), as shown.
2-3. Place an end cap (E) onto the other long tapered tube (D) and then place the tapered end
into the other long tapered tube (D), as shown. This is the tube assembly.
Now continue to step 3, page 9.
2-4.
zoomed in view
D
top
H
Pg 7 of 28
set screw
C
D
D
E
tapered end at
the top
H
tapered end at
the top
H
tapered end at
the top
85 in.
96 in.
(800) 892-3986
IS02142-I3
to
