STEP 2
NOTE: ASSEMBLY SHOWN FOR 77 - 84 in. DISTANCE.
2-1. Slide two tube collars (H) down a long tapered tube (D) and use set screws to loosely
tighten into place, you will be adjusting later. Repeat process for the other long
tapered tube (D).
2-2. Place an end cap (E) onto the long tapered tube (D), as shown.
2-3. Place the tapered end of the long tube (D) into the untapered end of the other
long tube (D), as shown. This is the tube assembly.
Now continue to step 3, page 9.
2-4.
tapered end at the top
Pg 6 of 28
H
H
H
H
E
tapered end at the top
zoomed in view
D
D
top
H
D
set screw
77 in.
84 in.
(800) 892-3986
IS02142-I3
to
