Tabla de contenido
USE
This wall-mounted hose reel is equipped with an "automatic" lock system. To unwind the hose, simply pull.
Once you have reached your desired length, the mechanism will lock. To wind the hose back up, pull it out
a few centimetres abruptly, so that the reel mechanism is activated. You can stop the hose from winding up
by pulling it again. For safety reasons, hold the hose firmly as it winds back up. To make it easier to wind the
hose up after use, you should turn off the water and let the water in the pipe drain away.
•
This hose reel and hose comes with a multijet gun. To begin watering, all you have to do is squeeze
the trigger. Using a locking ring maintains pressure on the trigger, enabling you to release it.
•
To change the type of jet, turn the ring fully to shift from one position to another.
•
Type of jet:
Tap
Conical
MAINTENANCE
1.
You must keep the hose clean so that the system does not get blocked.
2.
It is highly recommended that you turn off the water before winding up the hose.
3.
For winter, you are advised to take the reel off the bracket and store under cover
TECHNICAL SPECIFICATIONS
Model
Hosepipe length
Hosepipe material
Working / Max. pressure
Hose diameter
Tap connector
Length of the water inlet connection
11/09/2019
Centre
Flat
Angle
Jet
Concentrated
NW-B30
30M (100FT)
PVC
8Bar/24Bar
Inner : 12mm - 1/2''
Outer : 15mm - 5/8''
19mm - ¾" + réducteur ½"
2m
EN
Shower
Spray
9
Tabla de contenido
