General Safety Instructions - Metabo SLA 14.4-18 LED Manual Original

Ocultar thumbs Ver también para SLA 14.4-18 LED:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
en
ENGLISH
Original instructions

1. General safety instructions

WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Always charge batteries in chargers recommended
by the manufacturer. Chargers designed for a specific
type of battery may pose a fire hazard when used
together with other battery types.
You must always insert the correct batteries in the
lamp. Using other batteries may cause injuries and pose
a fire hazard.
When not in use, keep batteries away from paper
clips, coins, keys, nails, screws or other small metal
objects that could bridge the contacts. Short circuits
between battery contacts can cause burns or fires.
Fluid may escape if batteries are used inappropri-
ately. Avoid all contact with this fluid. In the event of
accidental skin contact, rinse the affected area thor-
oughly. If the fluid enters your eyes, seek immediate
medical assistance. Escaping battery fluid can cause
skin irritation or burns.
Do not operate the lamp in potentially explosive
environments containing flammable dust, fluids or
gases . The lamp can generate sparks which may ignite
dust or vapours.
Avoid accidental operation. Make sure that the lamp
is switched off before connecting the battery and
before picking up or carrying the lamp. Accidentally
pressing the switch on the device or connecting the
device to the power supply when already switched on
can lead to accidents.
Always switch off the lamp when not in use.
Never use electrical devices with a defective switch.
Electrical devices that can no longer be switched on or off
are dangerous and must be repaired immediately.
Remove the battery before adjusting, cleaning and
storing the device or changing accessories. These
precautionary measures prevent accidental operation of
the lamp.
When not in use, keep the lamp out of the reach of
children. Do not allow personnel to use the device
unless they are already familiar with it or have read
these instructions. Electrical devices are dangerous
when used by inexperienced personnel.
Maintain the device carefully. Check that all moving
parts are functioning correctly and do not seize,
make sure that no parts are broken or damaged to
an extent where they affect the function of the lamp.
Have damaged parts repaired before using the
device. Many accidents are caused by poorly main-
tained electrical tools.
Do not operate the lamp without a window, or with a
window that is damaged.
6
Use the lamp, accessories, etc. as described in
these instructions. Take into consideration the
working conditions and tasks required. Using elec-
trical devices for applications other than those intended
can lead to dangerous situations.
Always have your lamp repaired by qualified
personnel using genuine spare parts. This will ensure
that the device functions safely.
Keep your lamp away from heat sources and fires.
Do not store your lamp in moist or wet ambient
conditions. Do not store in locations where temper-
atures may reach or exceed 40 °C. Examples include
alcoves, motor vehicles or metal structures during the
summer.
Do not expose the lamp to rain or damp conditions.
Do not leave the lamp on while unattended.
The device is designed for use indoors.
Never use an incomplete lamp, or one on which an
unauthorised modification has been made. Do not
switch on the lamp if tool parts or guard devices are
missing or defective.
Ensure it is steady. Secure the lamp properly if it is
attached to a stand.
Protect battery packs from water and mois-
ture!
Do not expose battery packs to naked flame!
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch or short-circuit battery packs!
Slightly acidic, flammable fluid may leak from
defective li-ion battery packs!
If battery fluid leaks out and comes into contact
with your skin, rinse immediately with plenty of
water. If battery fluid leaks out and comes into
contact with your eyes, wash them with clean water and
seek medical attention immediately.
Warning - general danger!
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Do not direct the light beam into the eyes of people
or animals.
Do not look into the light source.
SLA 14.4-18 LED / SLA 14.4-18 LED Pro:
In accordance with IEC/EN 62471 for
"Photobiological safety of lamps and lamp
systems", these lamps are in the Exempt Group.
ULA 14.4-18 LED / ULA 14.4-18 LED Pro, Power-
Maxx ULA 12 LED:
Risk group 2:
Tabla de contenido
loading

Este manual también es adecuado para:

Ula 14.4-18 ledSla 14.4-18 led proUla 14.4-18 led proPowermaxx ula 12 led

Tabla de contenido