Consumables; List Of Consumables - JAC PICOMATIC Manual Del Usuario

D. Open the cover. Remove the 4 screws from the front table and withdraw it.
E. On the left-hand inner side, remove screw A securing the front frame link.
F. Lay the frame down forwards. Replace the blades on the rear frame (place something to
protect yourself on the front frame blades). Remove the locknuts on screws B (MRF – MRM –
MRQ). Remove the blade-tightening Allen screws B. Replace the blades, checking that they
locate correctly in the swing arm pins. Retighten the blades by tightening screws B, using the
blades remaining on the frame as a reference. Then tighten the nuts (machine fitted with
lubrication option).
In order not to distort the frame and avoid the risk of dangerous breakages, only replace 1 to 3
blades at a time alternating from left to right.
Resume the procedure from point E for the front frame and refit the front frame and the cover
sections.
Connect your machine to the mains supply; it is now ready.
Check that your approved agent has recorded his work in your service booklet in order to maintain
your 5-year warranty cover.
9

CONSUMABLES

When ordering spare parts, check with your approved agent which part is required based on the
spare parts catalogue issued by the manufacturer.
Always quote the machine serial number shown on the nameplate.
Your agent will place the orders with JAC.
9.1

List of CONSUMABLES

ITEM CODE
7240031 A 31 BELT
5690010 SLIDE PAD, 100 MM
5740162 FRAME LINK
6110001 JAC KNIFE, 13 MM/0.5 MM
6110011 JAC KNIFE, 13 MM/0.5 MM + TEFLON
5310026 LOAF HOLDER SPRING PLASTIC RING
5310030 LOAF HOLDER SPRING STAINLESS STEEL RING
5690151 LOAF HOLDER PAD
6530002 PHOTOELECTRIC CELL REFLECTIVE STRIP
5690102 JAC FLAP
6120002 PUSHER FELT PAD
BMJL001
JACFIX SPRING
BMJL002
English
DESCRIPTION
14
MODEL
ALL
ALL
ALL
PICOMATIC 450
PICOMATIC 450M
PICOMATIC 450
PICOMATIC 450M
ALL
ALL
ALL
PICOMATIC 450M
ALL