Preparing
• When the TV is turned on for the first time after
being shipped from the factory, initialization of the
TV may take approximately one minute.
• Image shown may differ from your TV.
• Your TV's OSD (On Screen Display) may differ slightly
from that shown in this manual.
• The available menus and options may differ from the
input source or product model that you are using.
• New features may be added to this TV in the future.
• The device must be easily accessed to a location
outlet near the access. Some devices are not made
by turning on / off button, turning off the device and
unplugging the power cord.
• The items supplied with your product may vary
depending upon the model.
• Product specifications or contents of this manual
may be changed without prior notice due to
upgrade of product functions.
• For an optimal connection, HDMI cables and USB
devices should have bezels less than 10 mm (0.39
inches) thick and 18 mm (0.7 inches) width.
• Use an extension cable that supports USB 2.0 if the
USB cable or USB flash drive does not fit into your
TV's USB port.
• Use a certified cable with the HDMI logo attached.
If you do not use a certified HDMI cable, the screen
may not display or a connection error may occur.
• Recommended HDMI cable types (3 m (9.84 feet) or
less)
• High-Speed HDMI®/™ cable
• High-Speed HDMI®/™ cable with Ethernet
B
A
A
• Do not use any unapproved items to ensure the
safety and lifespan of the product.
• Any damages or injuries by using unapproved items
are not covered by the warranty.
• Some models appear to have a thin film on the
screen. It is actually part of the screen; do not
remove it.
B
* A 10 mm
(0.39 inches)
* B 18 mm
(0.7 inches)
Optional Extras
Optional extras can be changed or modified for quality
improvement without any notification. Contact your
dealer for buying these items.
These devices work only with certain models.
The model name or design may be changed due to
the manufacturer's circumstances or policies.
(Depending upon model)
Wall Mounting Bracket
Make sure to use screws and wall mounts that meet
the VESA standard. Standard dimensions for the wall
mount kits are described in the following table.
B
Model
43UU340C
VESA (A x B)
200 x 200
Standard screw
M6
Number of screws
4
LSW240B
Wall mount bracket
(optional)
MSW240
Model
65UU340C
VESA (A x B)
300 x 300
Standard screw
M6
Number of screws
4
Wall mount bracket
OLW480B
(optional)
A
49UU340C
55UU340C
300 x 300
M6
4
OLW480B
MSW240
75UU340C
86UU340C
600 x 400
M8
4
LSW640B
5