Bestway Hydro-Force Kahawai Manual Del Usuario página 2

4. Assemble the seat (Included with product #65303; #65310).
Connect the seat to the D-ring on the board. The seat can be adjusted to accommodate the footrest.
5. Attach the safety rope to the tow ring, and place the belt around your ankle (Fig.3).
Fig. 3
Oar Installation(#65302; #65303; #65310; #65329; #65330)
Adjust the oar length according to your height.
Take your height and add 8" for surfing length and 10" for touring length.
A
NO PROTECTION AGAINST DROWNING
1
WARNING
A
PROHIBITION
B
C MANDATORY
NO PROTECTION AGAINST DROWNING
1
NOT FOR CHILDREN 14 YEARS OF AGE AND BELOW; APPLY ONLY TO CHILDREN ABOVE 14 YEARS OF AGE
2
DO NOT USE IN WHITE WATER
3
DO NOT USE IN BRAKING WAVES
4
DO NOT USE IN OFFSHORE WIND
5
DO NOT USE IN OFFSHORE CURRENT
6
READ INSTRUCTIONS FIRST
7
8 NUMBER OF USERS, 1 ADULT
9 SWIMMERS ONLY
MAXIMUM LOAD CAPACITY 65302: 110KG; 65305/65306/65329: 120KG; 65303: 130KG; 65308/65312/65330: 140KG; 65310: 160KG
10
SAFE DISTANCE TO SHORE 150 M
11
ALWAYS SUPERVISE CHILDREN IN WATER
12
FULLY INFLATE ALL AIR CHAMBERS
13
303021211239_21x28.5cm_20季SUP冲浪板说明书65302,65303,65305,65306,65308,65310,65312,65329,65330－英
Deflation
Maintenance:
1. Inflate according to the PSI marked besides the valve;
2. To avoid the long-time exposure to sunshine or rain, put the outside cover on top for protection when it not being
used;
3. Clean it with mild soap water and soft cloth in case it is not going to be used for a long time. Dry it before putting
them away. Store it at a dry and shady place and keep it out of reach of Children.
Storage
1. Deflate the board by unscrewing the cap of air valve, press the spring valve and turn clockwise.
2. Remove all the accessories from the board. Use a cloth to gently dry all surfaces. Keep the board and all
accessories clean and dry.
MAX
3. Fold the board from front to back to remove additional air.
4. Store in a cool, dry place and out of children's reach.
NOTE: Do not unfold this product when the temperature is low, leave the product in the room
temperature (over 20ºC) for 24 hours before inflation.
MAX
Repair
Easily adjust the length
• Fully clean the area to be repaired.
• Cut the correct size from the repair patch material.
• Apply only the amount of glue (not included) needed to cover the repair site.
14
0
B
2
3 4
5 6
2
C
max.
... kg
SWIMMERS ONLY
9
100 %
12
1 0
7 8
150m
10 11
13