Install The Illuminator Kit (Inverted Installation) - Axis Q8685-LEPTZ Guia De Instalacion

4. Tilt the bottom cover backward to its end position and tighten the two front screws of
the positioning unit (T20, torque 3.0 Nm).
5. Tilt the bottom cover forward to its end position and tighten the two rear screws of
the positioning unit (T20, torque 3.0 Nm).
NO NO TICE NO TICE TICE
To reach the positioning unit screws, use a screwdriver with a long enough blade (see
picture above).

Install the illuminator kit (inverted installation)

WARNING
• Risk of electric shock. Make sure the power supply is disconnected.
AXIS Q8685-LE PTZ Network Camera
37
EN