Connection Diagrams; Install The Hardware - Axis Q35-V Serie Guia De Instalacion

Connection Diagrams

I/O Connector
1
0 V DC (-)
2
DC output 12 V, max 50 mA
A
I/O configured as input
B
I/O configured as output

Install the Hardware

Route the cables
• If you want to route the cables along the wall, seepage 17.
• If you want to route the cables through the wall, see page 19.
• If you are attaching a pipe to the mounting bracket, see page 20
• If you are using a conduit adapter to route the cables along the wall, see the Installation
Guide delivered with the conduit adaptor.
Route the cables along the wall
1. Use the drill template to drill four holes for the mounting bracket.
2. Drill a hole in the side lid for the cable.
AXIS Q35-V Series
17