Princess Grind & Brew Manual Del Usuario página 14

- Do not use the appliance without water in
the water reservoir.
- Do not exceed the maximum mark (10 cups)
when you fill the water reservoir. Make
sure that the water level is always above
the minimum mark (2 cups) during use.
- Only use cold water to fill the water
reservoir.
- Do not use carbonated water or other
liquids to fill the water reservoir.
- Do not pour water in the coffee bean
compartment.
• Open the cover (24).
• Fill the water reservoir (14) with water up
to the required mark on the water level
indicator (15).
• Do not fill the water reservoir with more
water than required for making the coffee.
Only use the amount of water required for
making the coffee. The appliance
automatically stops when the water
reservoir is empty.
• Close the cover (24).
Setting the coffee quantity
(fig. B & C)
The coffee quantity selector (3) is used for
setting the required coffee quantity.
The coffee quantity selector (3) can be set to
2, 4, 6, 8 or 10 cups.
Note: The appliance can only be used when
the display is activated. If the display is not
activated, press any button to activate the
display. The appliance is ready for use.
• Repeatedly press the coffee quantity
selector (3) to set the coffee quantity.
The number of cups (A) is shown on the
display (8).
Setting the coffee strength
(fig. B & C)
The coffee strength selector (4) is used for
setting the required coffee strength.
The coffee strength selector (4) can be set to
mild coffee (MILD), medium coffee (MEDIUM)
and strong coffee (STRONG).
Note: The appliance can only be used when
the display is activated. If the display is not
activated, press any button to activate the
display. The appliance is ready for use.
• Repeatedly press the coffee strength
selector (4) to set the coffee strength.
The coffee strength (B) is shown on the
display (8).
Setting the ground coffee fineness
(fig. E)
The ground coffee fineness selector (9) is used
for setting the required fineness of the ground
coffee when using coffee beans. The ground
coffee fineness selector (9) can be set to
different positions from fine coffee grounds to
coarse coffee grounds.
• Turn the ground coffee fineness selector
(9) to the required position to set the
fineness of the ground coffee.
Making coffee with coffee beans
(fig. A - H)
Before you proceed, we would like you to
focus your attention on the following notes:
- Only use coffee beans that are suitable for
the appliance.
- Only use paper coffee filters (1x4) that are
suitable for the appliance.
• If the grinding function is not activated,
press the grinding button (2) to activate
the grinding function. The coffee quantity
and the coffee strength are shown on the
display.
• Fill the water reservoir (14) with the
required amount of water.
• Do not fill the water reservoir with more
water than required for making the coffee.
Only use the amount of water required for
making the coffee. The appliance
automatically stops when the water reservoir is empty.
• Open the cover (27).
• Fill the coffee bean compartment (13)
completely with coffee beans.
• Close the cover (27).
• Set the ground coffee fineness. Refer to
the section "Setting the ground coffee
fineness".
14