Calculation of the torque setting for divergent depth gauges in
respect of the spigot end adaptor:
The new torque setting M
following formula:
= The torque which must be set on the torque
M
xW
wrench scale.
M
= The torque with which the screw or nut
A
is to be tightened.
l
= The distance between the center of the torque
WZ
wrench adaptor's locking pin and the center of
the handle (see table in section 7).
l
= Standard gauge (see table in Section 7 or
CZ
certificate)
l
= The distance between the center of the torque
x
wrench adaptor's locking pin and the center of
the screw or nut (also referred to as tool
accessory depth gauge).
EN
is calculated according to the
xW
14