English (Original Instructions) - Luna AIWC1/2”TH-LT-S Traducción De Instrucciones Originales

Pos
.
1. Square drive
2. Trigger
3. Air outlet opening
4. Swivelling air inlet
5. Control for rotation
English
Art. No.
Luna
Square drive
Socket dimension
Bolt capacity
Free speed
Max torque (3 steps)
Max torque (3 steps)
Max. reverse torque
Max. reverse torque
Hammer mechanism
Sound level
(ISO 15744:1999)
Vibration
(ISO 8662-7)
Min. hose size
Air inlet
Air consumption at 100% int.*
Air consumption at 15% int.*
Air consumption at 100% int.*
Air consumption at 15% int.*
Weight
*At 6.2 bar
1
2
5
3
21124-0106
AIWC1/2"TH-LT-S
inch 1/2
mm 17, 19, 21, 22
mm M8-M16
rpm 3500
Nm 90
ft-lb 66
Nm 675
ft-lb 500
type Twin hammer
dB(A) 88
m/s <2.5
2
inch 3/8
inch 1/4
l/min 330
l/min 49.5
cmf 11.65
cmf 1.75
kg 1.9
22
Reversible impact wrench. Due to its custom torque and high reverse torque, very sui-
table for use in maintenance and service area. Equipped with quick levers between the
tightening and loosening moments (Pos. 5). Made of composite material. Pistol type
model with air outlet integrated in the handle (Pos. 3). Equipped with a step less trigger
(Pos. 2) as well as swivelling air inlet 360° (Pos. 4) for ease use of the machine and air
hose The grip is made of rubber and integrated into the handle for higher comfort and
nice design which provides isolation against cold air and less vibrations. The machine
i designed to reduce vibrations appearing to its high impact power. Square drive with
ring locking of the impact sockets.
Supplied in set with 3pcs plastic covered extended sockets 17, 19, 21mm and 1pc
extended ditto 22mm without plastic cover.
4
•
User of the tool should always take care of his and other persons' safety. The user
must always use personal protective equipment.
•
Wear safety goggles, in order to reduce risk of eye injuries that could be caused by
flying sawdust, dust and sparkles.
•
Inhalation of dust can be harmful to health. Wear a suitable visor or breathing appa-
ratus, when working in a dusty environment.
•
In case of continuous work wear safety gloves protecting against the cold air.
•
In order to avoid eventual aural injuries, always use ear protection when using the
tool.
•
The user must always pay attention to the fact that continuous use of rotating and
impact producing manual tools could result in baneful influence on health caused by
the vibration.
•
Ergonomic load: Work with the tools related to recurrent, monotone movements and
uncomfortable body positions may cause back, scruff, arm, knee and other joint inju-
ries.
Description
Health hazards
23