Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Panel clips (4)
A
The World's best kits.
®
Subaru BRZ
Visit
MetraOnline.com
specific applications
KIT FEATURES
• ISO DDIN radio provision
• Painted high gloss black to match the factory finish
B
MetraOnline.com
2016-Up
for more detailed information about the product and up-to-date vehicle
C
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
95-8912HG
I N S TA L L AT I O N I N S T R U C T I O N S
U.S. Patent #D911,325
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-1761
Antenna Adapter: 40-LX11
Steering wheel control interface: ASWC-1
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 3/24/21 INST95-8912HG
Manuales relacionados para Metra 95-8912HG
Resumen de contenidos para Metra 95-8912HG
- Página 1 Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 3/24/21 INST95-8912HG...
- Página 2 DASH DISASSEMBLY 1. Unclip and remove the radio trim panel. (Figure A) 2. Remove (4) 10mm screws securing the radio. Slide the radio out, then unplug and remove. (Figure B) Continue to Kit Assembly (Figure A) (Figure B) 386.257.1187 MetraOnline.com...
- Página 3 3. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation . 4. Slide the radio into the dash, then secure using the factory screws.
- Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians The World’s best kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 3/24/21 INST95-8912HG...
- Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 3/24/21 INST95-8912HG...
- Página 6 DESMONTAJE DEL TABLERO 1. Suelte a presión y quite el panel de alrededor del radio. (Figura A) 2. Quite los (4) pernos de 10mm que sujetan el radio de fábrica, y luego desconecte y quite el radio. (Figura B) Continúe con el Ensamble del Kit (Figura A) (Figura B) 386.257.1187...
- Página 7 Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Pruebe el radio para verificar que funcione correctamente. 4. Deslice la radio en el tablero, luego asegúrela con los tornillos de fábrica.
- Página 8 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). The World’s best kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 3/24/21 INST95-8912HG...