1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-8720B
  6. Instrucciones de instalación

Metra 95-8720B Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS FOR PART 95-8720B
Smart ForTwo 2011-up
KIT FEATURES
• Double DIN radio provision
• Painted scratch resistant black
KIT COMPONENTS
• A) Radio Trim Panel • B) Brackets
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1783 wire harness
Antenna Adapter: • 40-VW10 antenna adapter
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • T-20 Torx
METRA. The World's best kits.
APPLICATIONS
95-8720B
™
1-800-221-0932
Dash Disassembly
– Smart ForTwo 2011-up ........................................ 2
Kit Assembly
– Double DIN radio provision ................................... 3
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2013 METRA ELECTRONICS CORPORATION
Table of Contents
Tabla de contenido
loading

Manuales relacionados para Metra 95-8720B

Resumen de contenidos para Metra 95-8720B

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 95-8720B APPLICATIONS Table of Contents Smart ForTwo 2011-up 95-8720B Dash Disassembly – Smart ForTwo 2011-up ........2 Kit Assembly – Double DIN radio provision ........3 KIT FEATURES • Double DIN radio provision • Painted scratch resistant black KIT COMPONENTS •...

  • Página 2: Dash Disassembly

    95-8720B Dash Disassembly 1. Unclip and remove the switch plate below the radio with the door locks and hazard switch in it. (Figure A) 2. Remove the (3) T-20 Torx screws exposed behind switch plate. (Figure B) 3. Unclip and remove the trim plate surrounding the factory radio.

  • Página 3: Kit Assembly

    Metra recommends using the proper mating adapters from Metra and/or AXXESS. 3. Mount the new radio assembly into the dash and reassemble dash in reverse order of disassembly using the 95-8720B radio trim panel (Figure A) instead of the factory trim panel.
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART 95-8720B NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

  • Página 5: Herramientas Requeridas

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8720B AplicAciones Indice Smart ForTwo 2011 y mas 95-8720B Desmontaje del tablero – Smart For Two 2011 y mas ........2 Ensamble del kit – Provisión de radio doble DIN ........3 cArActerísticAs del kit •...

  • Página 6: Desmontaje Del Tablero

    95-8720B Desmontaje del tablero 1. Desenganche y retire la placa de interruptor debajo del radio con los seguros de la puerta y el interruptor de las luces intermitentes. (Figura A) 2. Quite los (3) tornillos T-20 Torx expuestos detrás de la placa de interruptor.

  • Página 7: Ensamble Del Kit

    3. Monte el nuevo ensamble de radio en el tablero y vuelva a armarlo al revés de como lo desarmó, usando (Figura A) el panel de la moldura del radio 95-8720B en lugar del panel de la moldura de fábrica.
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8720B EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.

Tabla de contenido