1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-8225G
  6. Instrucciones de instalación

Metra 95-8225G Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS FOR PART 95-8225G
Toyota Venza 2009-up
KIT FEATURES
• Double DIN radio provision
• Painted to match factory dash, G = Gray
KIT COMPONENTS
• A) Double DIN trim plate
A
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761 - 1987-up Toyota harness • TYTO-01 - 2003-up Toyota JBL • AX-LCD
Antenna Adapter: • 40-LX11 (2013-up only)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket wrench • Small flat blade screwdriver
• Magnetized universal swivel headsocket adapter
METRA. The World's best kits.
95-8225G
1-800-221-0932
™
Dash Disassembly
– Toyota Venza 2009
Kit Assembly
Double DIN radio provision
–
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
Table of Contents
............................................ 2
............................... 3
Tabla de contenido
loading

Manuales relacionados para Metra 95-8225G

Resumen de contenidos para Metra 95-8225G

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 95-8225G Table of Contents Toyota Venza 2009-up 95-8225G Dash Disassembly – Toyota Venza 2009 ..........2 KIT FEATURES Kit Assembly • Double DIN radio provision Double DIN radio provision • Painted to match factory dash, G = Gray –...

  • Página 2: Dash Disassembly

    95-8225G Dash Disassembly 1. Unclip and remove the trim panel to the right of the shifter. (Figure A) 2. Remove (1) Phillips screw from the bottom of the climate control then unclip and remove the climate control. (Figure B) 3. Remove (4)10 mm bolts securing the radio.

  • Página 3: Kit Assembly

    Rear view - A/C vent panel 1. Locate the factory wiring harness in REAR VIEW - A/C VENT PANEL the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation.
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART 95-8225G NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

  • Página 5: Toyota Venza 2009 Y Mas

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8225G Tabla de contenido Toyota Venza 2009 y mas 95-8225G Desmontaje del tablero – Toyota Venza 2009 ..........2 CARACTERÍSTICAS DEL KIT Ensamble del kit • Provisión de radio doble DIN Provisión de radio doble DIN •...

  • Página 6: Desmontaje Del Tablero

    95-8225G Desmontaje del tablero 1. Desenganche y quite el panel de moldura a la derecha de la palanca de velocidades. (Figura A) 2. Quite (1) tornillo Phillips de la parte inferior del control de clima y luego desenganche y quite el control de clima.

  • Página 7: Ensamble Del Kit

    1. Ubique el arnés de cableado de fábrica de aire acondicionado REAR VIEW - A/C VENT PANEL en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe el radio para...
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8225G EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y NOWLEDGE IS OWER fabricación inscribiéndose en la escuela de Enhance your installation and fabrication skills by enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida...

Tabla de contenido