Transmitter Handling; Binding The Transmitter And Receiver - Carson Reflex Wheel Start Manual De Instrucciones

TRANSMITTER HANDLING

A. THROTTLE TRIGGER
Forward/
Speed up
Neutral
FAIL SAFE FUNCTION SETTING
• Please turn on the Transmitter / then pull the tigger anywhere
you want to and hold it
• Press the SW button of the receiver about 2 sec

BINDING THE TRANSMITTER AND RECEIVER

1
1. Turn on the receiver power. Press the SW
switch. The receiver's LED should start
flashing.
ATTENTION
Keep the transmitter and receiver not over 40 cm
apart when setting and binding.
Brake/
Speed down
Left
2
2. Turn on the transmitter.
B. STEERING WHEEL
Neutral
• The LED should start flashing for 5 sec
• Relase SW button and TH tigger and turn off the the Transmitter
During the binding process no other transmit-
ter should be operated in the vicinity at the
same time!
1. Push the trigger
forward to slow down
or brake.
2. Pull the trigger back-
ward to accelerate.
Right
3
LED
3. When the LED on the receiver becomes
solid, the binding process is completed.
19 // GB