Handle Adjustment - BAUKER CCP240JD Manual De Instrucciones

WARNING: MAKE SURE THE TOOL IS OFF AND UNPLUGGED BEFORE PERFORMING
THE FOLLOWING OPERATIONS:
Choose the correct disc for the job to be carried out.
The tool includes 2 discs, each of them for a specific function.
Figure 2: The application disc (made of towel material) is to apply wax on the surface.
Figure 3: The polishing disc (made of wool) is used after applying the wax, to remove the
residues from the surface.
63
Disc installation
Select the appropriate disc for the intended use (applying wax or polish). Then, slide the
elastic around the edges of the pad. The surface of the polisher should be smooth and
even, with the elastic placed evenly around the edge.
Figure 4: How to install the discs

Handle adjustment

1. Separate the handle from the body of the tool, as shown in the figure.
Figure 5: Movement to adjust the handles
The handle has three positions and it does not rotate completely. Do not force it!
Configuration and
preparation
Figure 6: Handle positions
64