JAC ECOMATIC Traducción Del Manual Original página 6

- This machine is intended for professional bakers ;
- This machine is solely intended for cutting warm baked bread ;
- It may only be used by one person at a time. (unless otherwise stated) ;
- Don't allow children or unauthorised persons to use or manipulate the machine ;
- It has to be kept and used inside in a location, away from humidity and heat ;
- The machine has to be adequately lit for carrying out the work satisfactorily ;
- Don't clean the equipment with water ;
- This machine has a noise level below 75 dB(A) as per standard EN ISO 3744.
- Before connecting your machine to the mains, check that the machine operation voltage
(see rating plate on the machine) and mains voltage are appropriate ;
- Connection of the machine has to be made using an earthed plug ;
- Your electrical installation supplying the machine has to be protected as indicated be-
low :
- North America : Main protection 15A ;
- Rest of the world : Main protection 16 A.
Note : All other problems resulting from another type of connection will not be taken into
account.
- If necessary fix the feet or casters delivered with the machine ;
- Verify the direction of rotation of delivery belt on the machine ;
- Please refer to the "Instructions" section for using the machine;
- The blades tension must be checked and, if necessary, adjusted during installation and
after having cut 50 loaves.
- Remove the electric plug before every maintenance and service operation ;
- Don't touch the cutters even when stopped ;
- If you need to change the blades, have this done by your authorised distributor ;
- Make sure that you wear anti-cut protective gloves when replacing the cutters or carry-
ing out operations in the vicinity of the blades ;
- All maintenance or part changing operations are to be carried out by a qualified person ;
CAUTION
CONNECTION
START-UP
DANGER
6