Installation; Unpacking The Product - Riello CS 25 R PLUS 200 N REG Instrucciones Para El Instalador

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14

INSTALLATION

5 UNPACKING THE PRODUCT

The systems
R
CS 25 R PLUS N REG arrive on a single pallet and
differ based on the number of collectors and the capacity of the
solar storage cylinder.
Pallet contents:
− Individually packaged collectors with data plate
− Double-coil solar storage cylinder with internal glazing
and solar station (equipped with solar regulator) pre-fit-
ted
− Anti-freeze liquid, contained in a cannister
− Expansion tank
The following items are supplied in a cardboard box:
− Fittings
− Thermostatic mixer valve
− Bracket for installation of the expansion tank
The following items are delivered in a plastic bag inside the
packaging:
− Instruction booklets and hydraulic test certificate
− Bar code label
− Serial number plate
− Energy label.
9
Be careful not to lose the two flat gaskets (1) in the corner (2)
of each collector.
9
The instruction booklets are an integral part of the system CS
25 R PLUS N REG and there it is recommended that they are
read carefully and kept in a safe place.
9
STORE IN A DRY PLACE AND DO NOT EXPOSE TO DIRECT SUNLIGHT
UNTIL THE TIME OF INSTALLATION! The packaging is not de-
signed to protect the product against rain or humidity. It can
also degrade if exposed to direct sunlight. Failure to comply
with these precautions could lead to irreparable damage to
the product.
9
A protective film is applied to the glass of the solar collec-
tor. On completion of installation, only remove this film if
you are going to put the system into service immediately.
2
2
Description
Solar collectors
Storage cylinder capacity
Propylene glycol
Solar station
Fittings kit
Solar controller
Expansion vessel
Thermostatic mixer valve
The delivery includes accessories, the bracket system for a par-
allel roof or a flat roof, contained in cardboard boxes, and the
longitudinal members whose length depends on the number of
collectors to be installed.
Installation
7
INSTALLATION
9
In some models of collec-
tors, the gaskets are fixed
to the attachments using
clamps.
1
CS 25 R PLUS N REG
200
300
1
2
200
300
10
10
1
1
1
1
1
1
18
18
1
1
l
l
l
Tabla de contenido
loading

Este manual también es adecuado para:

Cs 25 r plus 300 n reg

Tabla de contenido