Hilti SR 30-A36 Manual De Instrucciones Original página 24

3 Description
3.1 Product overview
3.2 Intended use
The product described is a cordless reciprocating saw. It is designed for cutting wood, wood-like materials,
metals and plastics.
The product is designed for two-handed operation.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
▶ Use only Hilti battery chargers from the C4/36 series for these batteries.
3.3 Possible misuse
▶ Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
▶ Do not use the product to cut pipes containing liquids.
▶ Do not saw into unknown materials.
3.4 Lithium­ion battery status display
The Li-ion battery state of charge and malfunctions of the power tool are indicated by the display on the Li­ion
battery. The Li­ion battery state of charge is displayed after pressing one of the two battery release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
1 LED blinks, the power tool is not ready for use.
4 LEDs blink, the power tool is not ready for use.
Battery state of charge cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given in the Troubleshooting section.
18 English
1
Blade holder
@
Mount for cutting assist
;
Folding scaffold hook
=
Speed preselection
%
Safety lock
&
Control switch
(
Rear grip
)
Battery state of charge indicator
+
Battery release button
§
Battery
/
Attachment eye for lanyard
:
Front gripping area
∙
Saw blade release lever
$
Dust removal adapter (USA: accessory)
£
Contact shoe
|
Release button for contact shoe
¡
Saw blade
Q
Cutting assist (accessory)
W
Meaning
State of charge: 75 % to 100 %
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
State of charge: 10 % to 25 %
State of charge: < 10 %
The battery has overheated or is completely dis-
charged.
The power tool is overloaded or has overheated.
2186517
*2186517*