Custom Settings - GE PP9030 Manual Del Propietário

Custom Settings

All Off pad for 3 seconds, then
immediately press and hold the Timer Select pad for
3 seconds to enter custom settings. Those two pads
must be pressed within 30 seconds. Any other pad
will cancel mode.
2. "C - -" appears on display. To navigate through the
Custom Settings, use the
V
3. To activate a new Custom Setting the user will
touch and hold the Timer Select pad for 3 sec.
activated for each Custom Setting. The red "On"
custom setting is activated.
4. The cooktop will exit Custom Settings if it is inactive
for 3 minutes.
5. To exit Custom Settings and save any changes, touch
and hold the All Off pad for 3 seconds.
Custom Settings Chart
Custom Settings
C0 (Factory Settings)
C1 (Control Lock)
C2 (LED light level)
C3 (Button Loudness)
C4 (Timer Alarm Loudness)
C5 (Timer Alarm Duration)
C6 (Timer Mode)
* Options in grey are default settings
12
or V
Custom Setting Choices
C01 -
C02 -
C11 -
Control Lock is unavailable.
C12 -
completely off to go into Auto Lock.
C21 - Full illumination
C22 - Medium illumination
C23 - Lowest illumination
C31 -
C32 -
C33 -
C41 - High
C42 - Low
C51 -
C52 - Alarm sounds for 60 seconds.
C53 - Alarm sounds for 30 seconds.
C54 - Alarm sounds for 15 seconds.
C61 -
C62 -
49-80747 Rev. 2