Campbell Hausfeld FP2090 Serie Manual De Instrucciones

Campbell Hausfeld FP2090 Serie Manual De Instrucciones

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

See Warranty on page 6 for important information about commercial use of this product.
Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Oilless Compressors
Description
Oilless compressors are designed for
do-it-yourselfers with a variety of home
and automotive jobs. These units
operate without oil. Compressed air
from this unit will contain moisture.
Install a water filter or air dryer if
application requires dry air.
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
an imminently hazardous situation which,
if not avoided, WILL result in death or
serious injury.
a potentially hazardous situation
which, if not avoided, COULD result in
death or serious injury.
a potentially hazardous situation which,
if not avoided, MAY result in minor or
moderate injury.
important information, that if not
followed, MAY cause damage to
equipment.
CALIFORNIA PROPOSITION 65
This product or its power
cord contains chemicals
known to the State of
California to cause cancer
and birth defects or other reproductive
harm. Wash hands after handling.
dust when you cut, sand, drill or grind
materials such as wood, paint, metal,
concrete, cement, or other masonry.
This dust often contains chemicals
known to cause cancer, birth defects,
or other reproductive harm. Wear
protective gear.
REMINDER: Keep your dated proof of purchase for warranty purposes!
© 2010
STOP!
Record the Model No., Serial No. and
date of purchase located on the base
Danger
indicates
below the pump in the space below.
Model No. ____________________
Date Code ____________________
Warning
indicates
Date of purchase _________________
Retain these numbers for future
reference.
Caution
indicates
Unpacking
Notice
After unpacking the unit, inspect
indicates
carefully for any damage that may
have occurred during transit. Make
sure to tighten fittings, bolts, etc.,
before putting unit into service. In case
of questions, damaged or missing parts,
please call 1-800-543-6400 for customer
assistance.
Have the date code, model number,
and parts list (with missing parts circled
before calling.)
You can
unit if damaged during shipping, handling
create
or use. Damage may result in bursting and
cause injury or property damage.
Attach it to this manual or file it for safekeeping.
FP2090, FP2091, FP2094 Series
DO NOT RETURN THE
PRODUCT TO THE
RETAILER! CALL
1-800-543-6400
Do not
operate
Breathable Air Warning
This compressor/pump is not
equipped and should not be
used "as is" to supply breathing
quality air. For any application
of air for human consumption,
the air compressor/pump will
need to be fitted with suitable
in-line safety and alarm
equipment. This additional
equipment is necessary to
properly filter and purify the air
to meet minimal specifications
for Grade D breathing as
described in Compressed Gas
Association Commodity
Specification G 7.1 - 1966, OSHA
29 CFR 1910. 134, and/or
Canadian Standards
Associations (CSA).
DISCLAIMER OF WARRANTIES
In the event the compressor is
used for the purpose of
breathing air application and
proper in-line safety and alarm
equipment is not
simultaneously used, existing
warranties shall be voided, and
the Manufacturer disclaims any
liability whatsoever for any
loss, personal injury or damage.
IN617403AV 1/10
Tabla de contenido
loading

Resumen de contenidos para Campbell Hausfeld FP2090 Serie

  • Página 13: Compresores Sin Aceite

    Ver la Garantía en página 19 para información importante sobre el uso comercial de este producto. Manual de Instrucciones Serie FP2090, FP2091, FP2094 Sírvase leer y guardar estas instrucciones.Lea con cuidado antes de tratar de armar, instalar, manejar o darle servicio al producto descrito en este manual.
  • Página 14: Informaciones Generales De Seguridad

    Compresores Sin Aceite Informaciones 9. Mantenga los dedos alejados del 17.Nunca rocíe la pintura y otros compresor cuando esté funcionando; materiales, directamente hacia el Generales de las piezas en movimiento o calientes, le compresor. Coloque el compresor lo Seguridad ocasionarían heridas y/o quemaduras. más lejos posible del área de trabajo, para minimizar la acumulación de 10.
  • Página 15: Conexion A Tierra

    Serie FP2090, FP2091, FP2094 Instalación (Continuación) Interruptor ON/OFF CONEXION A TIERRA Mango 1. Este producto está diseñado para circuitos nominales de 120 voltios y tiene un enchufe para conexión a tierra similar al de la Figura 1. Válvula de seguridad Cerciórese de conectarlo a un tomacorrientes cuya configuración sea similar a la del enchufe.
  • Página 16: Mantenimiento

    Compresores Sin Aceite Funcionamiento HUMEDAD EN EL AIRE COMPRIMIDO (Continuación) La humedad que se acumula en el aire comprimido se convierte en gotas a medida que sale del cabezal del compresor de aire. Cuando el nivel de humedad es muy alto Reinicio del motor - (no se muestra, o cuando el compresor ha estado en uso continuo por mucho tiempo, ésta se acumulará...
  • Página 17: Protector Térmico

    Serie FP2090, FP2091, FP2094 Mantenimiento CONCLUSIÓN DEL 5. Debe desconectar la manguera del TRABAJO/ALMACENAJE compresor y colgarla con los (Continuación) extremos hacia abajo para que toda 1. Coloque el interruptor de ON / OFF humedad se drene. (I / O) en la posición OFF ( O ) PROTECTOR TÉRMICO (apagado).
  • Página 18: Guía De Diagnóstico De Averías

    Compresores Sin Aceite Guía de diagnóstico de averías Problema Posible(s) Causa(s) Acción a tomar El compresor 1. El interruptor está en la posición 1. Asegúrese de que el compresor esté enchufado y que OFF (apagado) no funciona el interruptor esté en la posición ON (encendido) 2.
  • Página 19 1. DURACION: A partir de la fecha de compra por el comprador original tal como se especifica a continuación: Un año. 2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100 Production Drive, Harrison, Ohio 45030 Teléfono: (800) 543-6400 3.

Este manual también es adecuado para:

Fp2091 serieFp2094 serie

Tabla de contenido