HAMPTON BAY 51548 Guía De Uso Y Mantenimiento página 11

Assembly - Hanging the Fan (continued)
6
Mounting the fan-motor assembly
(close-to-ceiling mount)
WARNING: The locking slots of ceiling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
until all four canopy screws are engaged and firmly tightened.
□
Carefully unhook the fan from the mounting bracket (A) and
align the locking slots of the ceiling canopy (C) with the two
screws in the mounting bracket (A). Push up to engage the
slots and turn clockwise to lock in place. Immediately tighten
the two mounting screws firmly.
□
Install the two mounting screws (FF) and lock washers (GG)
(saved from Assembly Step 1 "Prepairing for mounting" into
the holes in the canopy (C) and tighten firmly.
□
You may now proceed to attaching the fan blades.
Assembly - Attaching the Fan Blades
1
Attaching the blade brackets
□
Fasten the blade bracket (I) to the motor (F) by inserting the
alignment post into the slot on the bottom of the fan-motor
assembly (F) and tightening the motor screws that are pre-
assembled to the blade bracket (I).
□
Repeat for the remaining four blade brackets (I).
A
D
C
F
11
Please contact 1-855-HD-HAMPTON for further assistance.
GG
FF
F
I
HAMPTONBAY.COM