How The Canifugue Works; Installing The Control System - Num'axes CANIFUGUE Manual De Instrucciones

Ocultar thumbs Ver también para CANIFUGUE:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

How the caniFuGue works

You can restrict your dog's play area by installing a wire on the ground, buried or raised
on an existing fence, called the antenna wire. This wire carries a radio signal from the
transmitter. When your dog, wearing a receiver collar around his neck, approaches this
limit, he is first warned by a beep that he is too close to an area where he is not allowed;
if he carries on, a stimulation will be emitted. Your dog will have to leave the area to stop
the stimulations.
an unlimited number of receiver collars can be used with one transmitter unit: you can
keep as many dogs as you wish safely in the same area.
The caniFuGue has been designed to give you complete satisfaction with an antenna
wire with a maximum length of 400 metres (equivalent to one square hectare). If a longer
antenna wire is used, the caniFuGue will still work, but the warning and stimulation
zones will be markedly reduced.

installing the control system

the transmitter:
Ø
- The transmitter must be installed in a weatherproof location: it can withstand changes
in temperature but will be damaged by water.
- Fix the transmitter on an interior wall near to an electrical supply (220 volts).
- Connect the transmitter to the power supply by plugging the adapter power cable into
the transmitter and connecting to the mains. (cf. Diagram No. 1)
the antenna wire:
Ø
For the system to operate, the wire should be connected to the transmitter and form an
uninterrupted loop. Both wires must be spaced 2 meters apart to avoid canceling the signal.
Either a 0.75 mm
performance.
From the transmitter unroll the wire around the perimeter of your property. To run the cable
from your garage or garden shed, pass it through a window or a door, or similar.
The wire can be placed on the ground, buried (maximum 10 cm deep) or fixed to a non-metallic
existing fence or wall (max. height: 0.50 m from the ground). The wire must not be taut as
variations in temperature may cause it to expand or contract.
wire or a 1.5 mm
2
can be used, or combined, with no effect on
2
Gb - 21
Tabla de contenido
loading

Tabla de contenido