English; Safety Instructions - EGAmaster ROSCAMATIC 80-3 Manual De Instrucciones

ENGLISH

Attention! Be careful.
1. Do not wear loose clothing. They could be caught by moving parts of the machine.
2. For outdoor work, rubber gloves must be worn.
3. Before starting up the machine, check that the electric cable and switch are in optimum
condition.
4. Before carrying out any maintenance work or change of accesories, disconnect the machine
from the mains.
5. Always use the machine´s indicicated accesories because if you don´t, it could lead to risk of
personal injury.
This is suitable for threading, cutting and reaming ½ ÷3" water, electricity and gas pipes. Besi-
des having compact structure, simple operation and higt eficiency. It is characterized by an auto-
matic profiling device that assures a higher quality thread, less power consumption and long life of
dies because the presure of the dies on the pipe is smaller than in the conventional systems.
It also has an automatic control of the thread length and that means that is not essential the ope-
rator attention. Automatic opening.
Theese threading machines have been widely applied in installing and building industries.
8

SAFETY INSTRUCTIONS

THREADING MACHINES 80 – 3
According to Waste
Electrical and Electronic Equipment
directive (WEEE), these ones must be
collected and arranged separately. If
you have to throw them out, please,
do not use the usual rubbish. Please,
contact your distributor for free
recycling.