Tabla de contenido
Idiomas disponibles
Idiomas disponibles
- 1 automatic die head ½-2"
- 1 automatic die head 2½-3"
- 3 set of dies (1/2-3/4"), (1-2"), (2½-3") BSPT or NPT.
- 1 set of legs.
- 1 oil can of 5 litres.
- Conection for foot pedal
- 2 screwdriver (5,5x25 and PH-2).
- Set of 4 Allen keys (4mm, 5mm, 6mm and 8mm).
IMPORTANT
When ordering spare parts please indicate its code number and the serial number of the machine.
Capacity
Condenser motor
Automatic oiling
Size
Weight
Differential
Thermomagnetic
The user must ensure that the electrical system where the machine is connected must have the
following protections:
2x25A/30mA or 2x40A/30mA differential and 2x16A thermomagnetic.
A) SETTING THE PIPE
A1- Open both chucks and insert the pipe through the rear chuck side and the front chuck (in this
order).
A2- Holding the right end of the pipe in your right hand, lock both chucks with a knocking movement.
A1
EQUIPMENT
TECHNICAL SPECIFICATIONS
1/2÷3"
1100W (230V/50-60Hz) - (110V/50-60Hz) ;
R.P.M.= 1/2÷2=24 / 2½ ÷3=12
850x500x400 mm.
114 Kg.
REQUIREMENTS OF THE ELECTRICAL SYSTEM
25A/40A/30mA
2x16A
OPERATION GUIDE
A2
9
Tabla de contenido
