Technical Data; Other Precautions - Felisatti DCF10/10.8R Instrucciones De Servicio

Battery-driven drills
Voltage
Type of battery
Battery capacity
No load speed
Speed 1
Speed 
Torque Speed 1/Nm
ø drill in steel
ø drill in wood
ø Max. screw
Drill chuck capacity
Keyless chuck
No. of torque settings
Reversible / Electronic
Charging Time
Weight according EPTA-
Procedure 01/00
Noise and vibration
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at hand to
use when carrying out maintenance on the indicated parts.
If the machine and charger are used carefully and normal
maintenance is carried out, they will work well for a long
time.
The functions and use of the tool you have bought shall be
only those described in this manual. Any other use of the tool
is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See figures)
A Keyless drill chuck
B Torque adjustment ring
C Speed selector
D Forward/reverse switch
E On/off/speed adjustment switch
F Battery
G Battery release button
H Screwdriver bit
I Battery charger
J Charging light
K Net light
L Lamp
M Discharging light

OTHER PRECAUTIONS

- Always connect the charger to a mains supply pro-tected by
a thermal cut out switch, for your own safety, in accordance
with established safety regulations regarding low-voltage
electrical installations.
- When drilling in walls, ceilings or floors, take care to avoid


TECHNICAL DATA

DCF10/10.8R
V 10,8
Li-ion
Ah 1,
/min
0-600
-
Nm 10/-
mm 10
mm 16
mm 5
mm 10
+
15
+/+
min 60
Kg 1,0
dB(A)
electric cables and gas or waterpipes.
•
wood, screw that do not require a hole to be drilled previously,
etc.
•
•
Any use that differs from the aforementioned is unau-
thorised.
1. Forward/reverse switch
To select the direction of rotation:
•
•
The anti-clockwise turn enables screws and nuts to be
loosened.
Warning! Only push the forward/reverse switch D when the
machine is switched off.
. Electronic speed adjustment
The speed can be adjusted continuously, not by stages,
according to the pressure exerted on the on/off switch E, from
the machine being switched off to the highest value for both
speeds, as shown in the table.
This drill is fitted with a reverse-current brake, which stops the
bit when the variable speed control is com-pletely released.
. Mechanical speed adjustment
These machines are equipped with a two-speed mechanism.
The selector C enables the speed to be adjusted to suit each
use.
•
DCF10/14.4R2 DCF10/18R2
1,
Li-ion
1,
0-50
0-1100
15/11
10
0
6
10
+
15
+/+
60
1,
85
USES OF THE MACHINE
Tightening and loosening screws for metals, screws for
Drilling in various types of metal.
Drilling in various types of wood and plastic.
ADJUSTMENTS AND FUNCTIONS
clockwise: push the D selector to the right.
anti-clockwise: push the D selector to the left.
Low speed (1) (lever backwards) for screwdriver action
18
Li-ion
1,
0-00
0-1100
16/1
10
0
6
10
+
15
+/+
60
1,