Sharp CD-BK260V Manual De Manejo página 19

9
Select the desired menu number using the direct search buttons
on the remote control.
" Playback will begin.
" After playback has finished, the menu will reappear. Select the menu number
you want to play.
To interrupt playback:
Press the button on the remote control.
To resume playback from the same point, press the
To stop the current operation and return to the menu:
Press the ( /RETURN) button for less than 0.5 seconds.
To completely stop the video CD:
Hold down the ( /RETURN) button for more than 1 second.
To remove the video CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
" If the DISC SKIP button does not allow to rotate the disc tray (you cannot remove
the disc), close and open again the tray.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Notes:
" During playback, you can select another disc by pressing either of the DISC SKIP
button or one of the 1 - 3 buttons on the remote control.
" Whilst the disc is being read ("TOC READ" is displayed), another disc cannot be
selected even if you press the DISC SKIP button or one of the
the remote control.
" Playback control allows a video CD to be played back according to instructions
recorded on the disc. The "previous", "next", "return" and "select" operations may
function differently, depending on the PBC CDs.
" Some video CDs with playback control may have an "auto pause" recorded on
them. When such a disc is played, the screen will stop automatically at the point
where an "auto pause signal" has been inserted.
" If the picture looks dirty when a video CD is played back, there may be a scratch
on the video CD. Replace it with another video CD in good condition.
The P.B.C. function will not work in the following conditions.
" When repeat, random, programme, bookmark, resume, disc digest, track digest or
time search play has been selected and playback begins.
" When track numbers are selected using the direct search, the
(NEXT ) or PRESET ( PREV.) button, and playback begins.
! To move the menu screen (menu screen
with more than 1 page)
To move to the next menu screen:
Whilst in the stop mode, press the
/SELECT/RESUME button.
To return to the previous menu screen:
Whilst in the stop mode, press the
Notes:
" This function may not work, depending on the disc.
" The PREV. or NEXT
desired portion.
! To play without activating the playback
control function
You can play a video CD with P.B.C. without activating the playback control function.
In this case, the menu screen will not appear, and the disc will be played in the same
way as a video CD without P .B.C.
1
Whilst in the stop mode, press the P.B.C. (P.B.C. AUTO/OFF) but-
1 - 3 buttons on
ton to cancel the P.B.C. mode.
The P.B.C. function cannot be cancelled whilst the menu screen is displayed.
2
Press the
Playback will begin.
Notes:
" The P .B.C. function can also be cancelled whilst in the playback mode.
" Some video CDs with P .B.C. cannot be played back when the P .B.C. mode is off.
PRESET
" See pages 19 - 26 to perform various playback functions without activating the
P.B.C. function.
PRESET button.
PRESET button.
button on the remote control allows you to locate the
<TV screen>
PBC OFF
( /SELECT/RESUME) button.
ENGLISH
01/4/24 CD-BK260V(X)E2.fm
E-18