Uline H-7208 Manual Del Usuario

H-7208
SEMI-AUTOMATIC
STRETCH WRAP
MACHINE WITH SCALE
Two Person Assembly
Recommended
MACHINE DIMENSIONS
Length
Width
Height
Turntable Diameter
Turntable Height from Floor
Wrapping Height
Operation Space
Maximum Load Size
Approximate Shipping Weight
ELECTRICAL SPECIFICATIONS
• 115 VAC, 60 Hz, Single-phase, 15 AMP
TURNTABLE SYSTEM
• 20 loads per hour (spiral)
• 12 RPM turntable maximum speed
• 4,000 lbs. turntable maximum load capacity
FILM CARRIAGE/ELEVATOR SYSTEM
• Adjustable raise and lower speeds
• Automatic height detection photoelectric sensor
SCALE
• RS232 Serial Port
PAGE 1 OF 40
1-800-295-5510
uline.com
SYSTEM SPECIFICATIONS
FILM DELIVERY SYSTEM
• Infinite / Manual Stretch Adjustment
98"
• 10" Diameter Roll Capacity
60"
• 20" Roll Width Capacity
132"
60"
4⁄"
110"
98 x 60 x 132"
52 x 52 x 110"
1,700 lbs.
Para Español, vea páginas 14-26.
Pour le français, consulter les pages 27-40.
CAUTION! Motor control equipment and
electronic controllers are connected to
hazardous line voltages. When servicing
drive and controllers, there may be exposed
components with housings or protrusions at or
above line potential. Extreme care should be
taken to protect against shock.
The user is responsible for conforming to all
applicable code requirements with respect to
grounding requirements. Do NOT use extension
cords to operate the equipment.
Disconnect AC input power before checking
components, performing maintenance,
cleaning up, and when the machine is not in
use. Do NOT connect or disconnect wires and
connectors while power is applied to circuit.
Wiring work should be performed only by
qualified personnel. There is a danger of
electric shock or fire.
WARNING! Loose clothing must NOT be worn
while the machine is in operation. Stay clear
of moving parts while the machine is running.
0321 IH-7208