Troubleshooting - NewAir NCH250SS00 Manual Del Propietário

TROUBLESHOOTING

You can resolve most common usage problems easily by reviewing and
following the troubleshooting information below.
Problem
Cigar cabinet does not
operate.
Cigar cabinet is not cold
enough.
The light does not work. • Check with your service center.
Vibration.
The cigar humidor
makes too much noise
The door will not close
properly.
LED could not display.
LED display error.
Cooling system not
functional.
www.newair.com
Possible Causes
• Not plugged in using different voltage. The circuit
breaker tripped or there is a blown fuse.
• Check the temperature control setting.
• Room temperature is too warm.
• The door is opened too often.
• The door is not closed completely.
• The door seal is not working properly.
• The humidor does not have the correct clearance.
• Adjust the front feet to securely level the appliance.
• The cabinet is not level.
• Check the fan.
• The cabinet is not level.
• The doors were reversed and improperly installed.
• The seal is weak.
• Main control board does not work.
• PCB Problem.
• Electrical cord problem.
• Display panel problem.
• Temperature point is off.
• Temperature controller panel is damaged.
EN
15