Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Net weight [kg]:
Levels, telescope:
Loading capacity [kg]:
Hydraulic lift [mm]:
This manual is and must be included in the delivery of the device and when it is sold. The owner and/or user of the device must be
familiar with the operating instructions before the device is started. The manufacturer is not liable for any personal injury and property
damage that is caused by incorrect or improper use of the product.
Following parts of the gear jack are included in one box: 1 basket – 2 carriages – 1 gear jack housing –4 sets of wheels.
Please check that all parts are available and not damaged during transport before you start assembling the gear jack.
Rules for accident prevention by law, as well as other generally approved rules for safety, occupational medicine and rules for accident
prevention for power-operated work equipment must be observed. Any kind of use beyond this range is considered non-compliance
with regulations. The manufacturer is not liable for any damages resulting thereof. The operating instructions are an integral part of
the delivery and must be handed over to the new owner when the product is resold. To ensure safe operation of the product, it is to be
operated, maintained or repaired only by properly trained personnel. Qualified personnel are persons who have the training, experience
and briefing as well as knowledge of relevant standards, regulations, rules for accident prevention, and are thus qualified to perform the
activitites required at the time, and to detect and avoid possible danger by doing so. The operator must ensure that the persons assigned
for operation, care, and maintenance have read and understood the operating instructions, and observe all the points therein, in order to:
•
avert danger to life and limb of the user and third parties,
•
ensure operational reliability of the car jack, and
•
eliminate downtime and harmful effects on the environment caused by incorrect handling.
Responsibilities for work must be clearly defined and observed to avoid unclear authorities in view of safety.
Maintenance on mechanical parts is to be done in intervals and to the extent as prescribed. After maintenance, all disassembled protec-
tive devices must be reassembled in a professional manner. The protective equipment and their protective effect must be inspected by a
technical expert before operation of the device. Disassembling, stopping and/or the bridging of separate protective equipment (covers,
protective enclosures, etc.) and/or safety protective devices (watchdog switch, overload valve, etc.) may cause severe physical or material
damages, and is therefore strictly prohibited by the manufacturer!! The manufacturer warrants the car jacks on the basis of the sales and
delivery conditions. The warranty becomes invalid, when:
•
damages are caused by improper operation,
•
repair or procedures are carried out by persons not authorized to do so,
•
accessories and spare parts are used which do not match the car jacks.
Malfunctions must be reported immediately after detection. The product must be labeled accordingly. Defects must be repaired immedi-
ately in order to reduce extent of damage, and to prevent interference with the safety of the device. If this is not complied with, warranty
will become invalid. Malfunctions must be reported immediately after detection. The product must be labeled accordingly. Defects must
be repaired immediately in order to reduce extent of damage, and to prevent interference with the safety of the device. If this is not com-
plied with, warranty will become invalid.
The products are manufactured according to state-of-the-art technology and are delivered safe for operation. Due to the method of
operation, there are locations and parts which cannot be covered or protected without significantly compromising functionality and
operability. Therefore, the operator must exercise a good, personal level of safety to protect himself and the device against damages. The
products may only be used and operated in the context of the conditions defined in the service level agreement and the delivery contract.
It is prohibited to refit, alter, or modify the devices without consultation with the manufacturer. If during operation (remaining) dangers
and risks not described in the manual become apparent, the operator is obliged to inform the manufacturer of them.
The manufacturer is not liable for any personal injuries and property damages, which are caused by improper use of the device. Each
operator is obliged to read these operating instructions before startup of the device.
•
The gear jack is designed only for installation and removal of control or differential gear. Never operate the gear jack contrary to its
intended use.
•
Make sure to read the instructions in the chapter "Using the gear jack under load" .
•
Do not overload. Overloading the gear jack may damage the device, or may cause personal injuries and property damages.
•
The gear jack is fitted with a safety valve which was adjusted in the factory. For safety reasons it is not permitted to adjust this valve
at any time.
•
To transport or pick up other vehicle components, special pick-up adapters (accessory) manufactured especially for this gear jack
must be used.
•
If not used, the piston must be retracted.
•
Always make sure that the vehicle is well supported.
1. Technical Specifications
34
1
500
820
2. Responsibility of the owner and/or use of the device
3. Packaging
4. Safety instructions
4.1 General safety instructions
4.2 Special safety instructions
6 / 16 - © BERNER
Tabla de contenido
