Preparation For Operation - VERTO 52G449 Manual De Uso

Ocultar thumbs

Contenido

página de 49

/ 49
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

GWARANCJA I SERWIS

Warunki gwarancji oraz opis postępowania w przypadku reklamacji

zawarte są w załączonej Karcie Gwarancyjnej.

Serwis Centralny

GTX Service

Ul. Pograniczna 2/4

02-285 Warszawa

Sieć

Punktów

Serwisowych

i pogwarancyjnych dostępna na platformie internetowej gtxservice.pl

Grupa Topex zapewnia dostępność części zamiennych oraz

materiałów eksploatacyjnych dla urządzeń i elektronarzędzi.

Pełna oferta części i usług na gtxservice.pl. Zeskanuj kod QR i wejdź:

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

SUBMERSIBLE PUMP FOR DIRTY WATER

52G449

CAUTION: BEFORE USING THE TOOL READ THIS MANUAL CAREFULLY

AND KEEP IT FOR FUTURE REFERENCE.

DETAILED SAFETY REGULATIONS

SAFETY OF USER OF SUBMERSIBLE PUMP FOR DIRTY WATER

• Connection to mains network should be done by a licensed

electrician and accordingly to IEC 364. Use of residual current device

is required, which breaks the circuit when earth leakage current

exceeds 30mA for 30 ms.

• Do not direct the pump water stream onto people, electric

equipment and the device itself.

• Disconnect the pump from power supply when performing

maintenance tasks.

• Children are not allowed to operate the pump.

• Do not pull or hold the pump by its power cable or water hose. Use

corrosion resistant cord attached directly to the pump handle for this

purpose.

• To ensure safe operation use only spare parts that are approved by

the manufacturer or original.

• Use connectors and equipment supplied by the manufacturer.

• Do not use the pump in case of damage of power cable or any other

part of the device, e.g. residual current device, water hose etc.

• When extension cord is used, socket and plug should use earthing

prong (connection).

• The pump is designed for household use.

• The pump can be used indoors and outdoors.

• Water ﬂoat must rest freely on water surface, it should not have

contact with obstacles. Blocked movement may cause pump

damage.

tel. +48 22 573 03 85

fax. +48 22 573 03 83

e-mail [email protected]

napraw

gwarancyjnych

• The pump is designed so all moving parts and the casing allow

for safe operation. The manufacturer is not responsible for

losses resulting from modifications of the device.

• Do not use the pump for liquids other than water, especially engine

fuels, cleaning liquids and other chemical products.

CAUTION! The design is assumed to be safe, protection measures

and additional safety systems are used, nevertheless there is

always a small risk of operational injuries.

CONSTRUCTION AND USE

Submersible water pump is a I protection class device designed for

pumping out clean water or dirty water containing particles with

maximum diameter of 35 mm. The pump is designed to operate under

water. When installed in appropriate well, it may be protection against

ﬂooding. It is ideal for removing water from garages, basements, tanks

or excavations ﬂooded with rain water. The pump is designed to pump

water at maximum temperature 35

Special base is speciﬁc feature of the pump, it allows to pump out the

water down to 5 cm level. The pump features automated ﬂoat switch,

which allows the pump to switch on and oﬀ by itself. It protects against

dry operation. Built-in vent valve allows easy water suction.

Use the pump according to the manufacturer's instructions only.

DESCRIPTION OF DRAWING PAGES

Below enumeration refers to the device elements depicted on the

drawing pages of this manual.

1. Handle

2. Float switch

3. Inlet holes

4. Connection

5. Connector pipe

* Diﬀerences may appear between the product and drawing.

MEANING OF SYMBOLS

CAUTION

WARNING

ASSEMBLY/SETTINGS

INFORMATION

EQUIPMENT AND ACCESSORIES

1. Connector pipe

2. Connection