SELECTING A LOCATION
The safe is to be placed into a drawer
and then secured to the drawer botttom.
For optimal safety and security, the safe
should be installed in an isolated, dry
and secure area.
THE SAFE SHOULD ALWAYS BE
KEPT OUT OF THE REACH OF
CHILDREN.
SECURING THE SAFE
NOTE: This safe is designed to be placed
into a drawer and then secured to the
drawer bottom. Failure to place into a
drawer and then secure to the drawer
bottom will compromise the safety and
security of the safe.
Select an appropriate sized drawer for your
safe. Place the safe in the drawer and try
opening and closing the safe and drawer.
Do not attempt to close the drawer with the
safe open.
Place the safe in the desired drawer and
mark the mounting holes with a pencil.
Remove the safe and drill the pilot holes for
the screws. Replace the safe in the drawer
and insert the screws through the mounting
holes and drawer bottom. For maximum
security, use all 4 mounting screws. Secure
the bolt by tightening the Nylock nut on the
screws. (Figure 1)
Figure 1
MAINTENANCE
Do not use glass cleaners or sprays on this
safe. Clean with a damp cloth.
IMPORTANT
Keep keys and your combination number in a
secure place, away from children. Keep this
record of your serial number and combination in a
secure place separate from your safe. To order a
replacement key set, follow the instructions on the
attached form.
STACK-ON PRODUCTS COMPANY
P.O. BOX 489
WAUCONDA, IL 60084
5
21
40274-1306