Selecting A Location - STACK-ON QPS-2012-E Manual De Instrucciones

SELECTING A LOCATION

The safe must be mounted to a
shelf. For op�mal safety and
security, the safe should be
installed in an isolated, dry and
secure area.
THE SAFE SHOULD
ALWAYS BE KEPT OUT OF
THE REACH OF CHILDREN.
SECURING THE SAFE
NOTE: This safe must be mounted
to a shelf. Failure to do so will
compromise the safety and
security of the safe.
NOTE ON LOCKING THE SAFE:
The safe needs to be in an upright
position, as shown in figure 1, for
the locking mechanism to
function properly. Failure to
mount the safe in the correct
upright position will compromise
the safety and security of the
safe.
Figure 1
QPS-2012-E
Secure the safe to a shelf using the predrilled
moun�ng holes in the safe and hardware
provided.
Place the safe in the desired loca�on and mark
the moun�ng holes to be used with a pencil.
Move the safe and drill the pilot holes for the
screws. For moun�ng to a shelf, drill 3/16"
diameter pilot holes and a�ach the safe using
the 3/4" screws and washers. (Figure 2)
Figure 2
IMPORTANT
Keep keys and your combina�on number in a
secure place, away from children. Keep this
record of your serial number and combina�on
in a secure place separate from your safe. To
order a replacement key set, follow the
instruc�ons on the a�ached form.
QPS-2012-E
4
40544-2012