Cross Tools CPG 3000 INV Manual De Instrucciones página 38

Turn the fuel cock(fig. 25, no. 8) to "OFF". Remove the
fuel hose from the fuel cock. Turn the fuel cock to "ON"
and fill the fuel in a suitable container using a funnel. Af-
ter the fuel tank has been completely emptied, shift the
fuel hose back to the outlet of the fuel cock.
▪ Loosen the drain screw of the carburettor and empty the
residual fuel from the carburettor (fig. 26, no. 9) into a
suitable container.
,
3. Unscrew the spark plug and pour ca. 20 ml of engine oil
into the spark plug hole. Carefully pull the pull-cord
starter (fig. 27, no. 5) until you can feel resistance. At
If the fuel can no longer be used due to impurities, dispose of it in
an environmentally responsible way.
36
Translation of the original operating instructions
this point, the piston is raised
during the compression
stroke, the inlet and outlet
valves are closed and a little
oil is distributed in the engine.
Storing the engine in this posi-
tion prevents corrosion in the
interior of the device.
16