Cross Tools CPG 3000 INV Manual De Instrucciones página 27

Translation of the original operating instructions
2. Ensure that the engine switch is set to "OFF" and that the line to the spark plug is
disconnected, before the safety equipment is dismantled or shifted.
3. Always keep the machine clean and make sure that the stickers are legible. They
contain important operating instructions and warn against risk. Replace the miss-
ing and illegible stickers.
4. Do not use petrol or inflammable solutions to clean the machine. The fumes of the
fuel or solutions can explode.
5. Always store the machine properly. It must be placed in a clean and dry place,
which is inaccessible to children.
6. Danger to life! For avoiding an electric shock, the device is secured using circuit
breakers, which are specially designed for this device. When replacing these
switches, an identical switch must be used to prevent an electric shock.
1.6. Intended use of CPG 3000 INV
The generator is intended for operating conventional electrical consumers such as
chains of lights, electric service tools (drilling machines, electrical chain saws,
compressors laptops, mobile phones, etc.. Ensure that the generator is earthed.
In case of a doubt, contact the manufacturer of your device.
A qualified electrician must be consulted in advance for connecting the
generator to stationary equipment such as heaters, household supply, air
conditioners or for power supply to caravans. Connection for feeding electrical
power into existing networks shall only be implemented by specialist
personnel and after prior approval by the energy supply company. The critical
point of an inductive consumer is the power consumption during switch-on.
The power consumption can be up to 3 times the rated power. This must be
taken into consideration at all times.
No liability is assumed for damages caused due to non-compliance with these in-
structions. You are required to read the operating instructions before using the device
for the first time. In case of doubts regarding the connection and operation of the de-
vice, contact T.I.P. Technische Industrie Produkte GmbH. Please note that our de-
vices have not been intentionally designed for commercial, handicraft-related or in-
dustrial use. We do not assume any warranty if the device is used in commercial,
handicraft or industrial companies as well as for corresponding activities.
1.7. Risks and scope of prevention
Risk
Direct electrical con-
tact
Burns
Hearing impairments Prolonged stay near a run-
Contact, inhalation
Description
Direct electrical contact with
wet hands can cause electri-
cal shocks.
Touching the exhaust can
cause burns.
ning generator can cause
hearing impairments.
Inhaling exhaust fumes can
be fatal!
Prevention
Avoid contacting the device with
wet hands and make sure the
device has appropriate ground-
ing.
Let the devices cool down after
operation.
Always wear ear protection.
Never operate the device in
closed rooms.
5
25