Initial Inspection; Before Operational Startup; Repairs And Maintenance; General Information - Minebea Intec PR 6130/04N Manual De Instalación

Cable Junction Box PR 6130/04N
2.3

Initial inspection

2.4

Before operational startup

2.5

Repairs and maintenance

2.5.1

General information

EN-6
Load cells to be used
PR 76/..N, /..C3
Check the contents of the consignment for completeness. Check the contents visually to
determine whether any damage has occurred during transport. If there are grounds for
rejection of the goods, a claim must be iled with the carrier immediately. The
Minebea Intec sales or service organization must also be notiied.
NOTICE
Perform visual inspection.
Before operational startup as well as after storage or transport, inspect the device
visually for signs of mechanical damage.
Repairs are subject to inspection and must be carried out at Minebea Intec.
In case of defect or malfunction, please contact your local Minebea Intec dealer or service
center for repair.
When returning the device for repair, please include a precise and complete description of
the problem.
Maintenance work may only be carried out by a trained technician with expert knowledge
of the hazards involved and the required precautions.
Load cells not to be used
MP load cells, all types
PR 4x, all types
PR 7x, all types
2 Safety instructions
Minebea Intec