sunjoe 24V-SB10-LTE Manual Del Usuario página 2

17. Use the right tools – Do not use tools for any job except
that for which they are intended.
18. Do not force the tool – It will do the job better and with
less likelihood of injury if it is used at the rate for which it
was designed.
19. Do not overreach – Keep proper footing and balance at
all times.
20. Stay alert – Watch what you are doing. Use common
sense. Do not operate the trimmer + edger when you are
tired, or under the influence of alcohol or drugs.
21. Store idle tools indoors – When not in use, tools should
be stored indoors in a dry and high or locked-up place out
of the reach of children.
22. Maintain tools with care – Keep cutting edges sharp
and clean for best performance and to reduce the risk
of injury. Follow instructions for lubricating and changing
accessories. Inspect the trimmer + edger periodically and
replace if damaged. Repair the trimmer + edger only at an
authorized service facility. Keep handles dry, clean, and
free from oil and grease.
23. Checked for damaged parts – Before continuing to use
the trimmer + edger, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for the alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any other
condition that may affect the trimmer + edger's operation.
A guard or other part that is damaged should be properly
repaired or replaced by an authorized service center
unless indicated elsewhere in this manual.
ADDITIONAL SAFETY INSTRUCTIONS
FOR GRASS TRIMMER + EDGER
1. Keep guards in place and in working order.
2. Keep hands and feet away from the cutting area.
m
WARNING!
Never use steel blades or other devices.
Use of any other accessories or attachments will increase the
risk of injury.
m
CAUTION!
The safety guard is critical to the safety
of the operator and the safety of people standing within a safe
distance of the trimmer + edger. The safety guard keeps the
trimmer + edger in good working order and must always be in
place during operation.
• Do not try to stop the cutting device (SharperBlade
with your hands. Always let it come to a stop by itself.
m
WARNING!
device (SharperBlade
• Only use the original type of SharperBlade
under any circumstances use metal line or nylon line
instead of SharperBlade
• Do not use the tool to cut grass which is not on the ground.
For example, do not cut grass growing on walls or rocks.
• Do not switch on the tool in an enclosed or poorly ventilated
space or in the presence of flammable and/or explosive
substances such as liquids, gases and powders.
• Only cut during broad daylight or with adequate
artificial light.
• Check that all grass cuttings and dirt have been removed
from the ventilation vents.
• Do not cross roads or gravel paths while the tool is
still running.
• When the tool is not in use, store it in a dry place and out of
reach of children.
• After use, remove the battery and check for damage. If you
have any doubt about the condition of the tool, contact an
authorized service center or call the Snow Joe
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
• Only use the tool according to the instructions given
in this manual.
• Check regularly that the screws are tight.
• Do not try to repair the tool or access internal parts.
Contact an authorized service center or call the Snow Joe
+ Sun Joe
®
(1-866-766-9563).
Battery + Charger
Safety Instructions
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only be
guaranteed if undamaged cells are used. Incorrect handling of
the battery pack can cause cell damage.
IMPORTANT! Analyses confirm that incorrect use and poor
care of high-performance batteries are the main factors
responsible for personal and/or product damage.
)
™
2
After switching off the tool, the cutting
) continues to rotate for a few seconds.
™
.
™
customer service center at 1-866-SNOWJOE
. Do not
™
+ Sun Joe
® ®
®