Sleep Function - Sangean PR-D5CL Manual Del Usuario

All manuals and user guides at all-guides.com
Setting radio alarm time
The alarm time may be set after the clock time is set. The alarm
can be set either radio is on or off.
1. Press the ALARM button, the radio alarm symbol will flash,
and the alarm time is shown.
2. During radio alarm flashing, press the SET knob
than 2 seconds followed by a beep tone, and the hour digits
will flash.
3. Rotate the SET knob to select the hour then press the SET knob
to confirm hour setting, and the minute digits will flash.
4. Rotate the SET knob to select the minute then press the
SET knob to finish setting.
5. Tune into the desired radio station and adjust the volume for the
alarm, and turn off the radio.
6. While the alarm is sounding, press the POWER button to stop it.

Sleep function

The sleep timer switches off the radio after a preset time
has elapsed.
1. Press and continue to hold down the Power button for more than
2 seconds, followed by beep tone, the display will cycle through
the available sleep times in the order 60-45-30-15-120-90-60.
Release the Power button when the required sleep time appears
on the display. The
the radio will play the last station selected.
2. To cancel the sleep function, press the POWER button, and the
symbol will disappear and radio is off.
symbol will appear on the display and
for more
GB
8