Tabla de contenido
1
5
•
•
1
3
q
4
2
5
6
w
66
All manuals and user guides at all-guides.com
3
4
2
6
•
•
Twin Needle Sewing (Optional)
1
attern selector:
D, G,
P
I – L
Presser foot:
Zigzag foot
2
Thread tension:
1–4
3
4
Twin needle:
2 LP -90 (2.0 mm left shank)
(Twin needle is optional)
5
Stitch length:
0.5–1 (Satin stitch patterns)
S.S. (Stretch stitch patterns)
6
Stitch width:
2.5
CAUTION:
* Turn off the power switch before changing the
needle.
* When sewing with the twin needle, test the stitches
on a scrap fabric before sewing on the actual fabrics.
* Do not set the stitch width at more than 2.5, or the
needle will hit the needle plate and the needle will
break.
1. Draw threads from the spools and pass them
through the points from 1 to 6 .
Thread each thread separately so not to tangle the
two strings of thread.
q
Presser foot lifter
2. The threading paths from 1 to 4 are the same
as single needle.
3. Slip one of the threads into the needle bar thread
guide on the left, and the other on the right.
w
Thread guide
4. Thread the needles from front to back.
* Do not use needle threader with twin needle.
* When changing the sewing direction, raise the
needles and turn the fabric.
Tabla de contenido
